中国碳捕集、利用与封存技术研发与示范

碳捕集、利用与封存(CCUS)是一项新兴的、具有大规模减排潜力的技术,有望实现化石能源使用的CO2近零排放,被认为是进行温室气体深度减排最重要的技术路径之一.开展CCUS技术的研发和储备,将为中国未来温室气体减排提供一种重要的战略性技术选择,受到政府、企业和学术界的广泛关注.本文从CCUS技术产生和发展的背景出发,概括了该技术的特点及存在的主要同题,总结了当前中国CCUS技术政策,介绍了中国CCUS技术研发、试点示范、国际合作等的开展情况,并通过与欧美等发达国家CCUS技术发展与示范活动现状的对比,初步分析了中国CCUS技术发展方面存在的主要不足.为进一步推动我国CCUS技术的研发与示范,文章提出应加强国家层面的技术政策指导和宏观协调、引导资源有效配置；推动建设行业间的CCUS技术合作平台；重视CCUS来来技术应用软环境建设等有针对性的建议.     

Mutagenicity of particulate matter fractions in areas under the impact of urban and industrial activities

Organisms in the environment are exposed to a mixture of pollutants. Therefore the purpose of this study was to analyze the mutagenicity of organic and inorganic responses in two fractions of particulates (TSP and PM2.5) and extracts (organic and aqueous). The mutagenicity of organic and aqueous particulate matter extracts from urban-industrial and urban-residential areas was evaluated by Salmonella/microsome assay, through the microsuspension method, using strain TA98 with and without liver metabolization. Additionally, strains YG1021 and YG1024 (nitro-sensitive) were used for organic extracts. Aqueous extracts presented negative responses for mutagenesis and cytotoxicity was detected in 50% of the samples. In these extracts the presence of potential bioavailable metals was identified. All organic extracts presented mutagens with a higher potential associated with PM2.5. This study presents a first characterization of PM2.5 in Brazil, through the Salmonella/microsome assay. The evaluation strategy detected the anthropic influence of groups of compounds characteristically found in urban and industrial areas, even in samples with PM values in accordance with quality standards. Thus, the use of a genotoxic approach in areas under different anthropic influences will favor the adoption of preventive measures in the health/environment relation.     

新型结构ABR的设计与水力特性研究

针对ABR自身的缺点,设计出一种新型结构的ABR.该反应器为双层结构,共有5部分组成,各部分容积各不相同.该反应器的设计思想是将ABR与生物滤池以及活性炭吸附等工艺相联合.这种设计能够最大程度地发挥各工艺的优势,进而达到更好的处理效果.通过脉冲响应实验对该反应器的水力特性进行研究,得出不同水力停留时间(HRT)下的停留...     

Adsorption of Pb(II) on variable charge soils amended with rice-straw derived biochar

Two Ultisols and one Oxisol from tropical regions of southern China were incubated with rice straw biochar to investigate the effect of biochar on their surface charge and Pb(II) adsorption using batch methods. The incorporation of biochar induced a remarkable increase in soil cation exchange capacity after 30 d of incubation. The incorporation of biochar significantly increased the adsorption of Pb(II) by these variable charge soils; the enhancement of adsorption of Pb(II) by these soils increased with the addition level of biochar. Adsorption of Pb(II) involved both electrostatic and non-electrostatic mechanisms; however, biochar mainly increased Pb(II) adsorption through the non-electrostatic mechanism via the formation of surface complexes between Pb²⁺ and functional groups on biochar. There was greater enhancement of biochar on the non-electrostatic adsorption of Pb(II) by the variable charge soils at relatively low pH. Therefore, the incorporation of biochar decreased the activity and availability of Pb(II) to plants through increased non-electrostatic adsorption of Pb(II) by acidic variable charge soils.     

HRT对固定床厌氧反应器运行效果的影响

为了考察水力停留时间(HRT)对炭纤维载体固定床厌氧反应器运行效果的影响,在进水COD分别为20 000~25 000 mg/L和40 000~45 000 mg/L2个浓度范围下,研究了不同HRT对反应器运行效果的影响。结果表明,通过HRT的调整,在达到相同有机负荷(OLR)下,进水COD为20 000~25 000 mg/L的COD去除率和产气量,明显比进水COD为40 000~45 000 mg/L的运行效果好;进水COD为20 000~25 000 mg/L,HRT为14 h,相应的OLR为41.09 kgCOD/(m3.d)时,COD去除率仍然维持在68%以上,沼气容积产气率达到14.55 m3/(m3.d)。炭纤维载体固定床厌氧反应器具有较高的COD去除率、产气效率以及抵抗低pH、高负荷冲击的能力,运行过程中没有发生反应器堵塞的现象。     

祁连山北坡自然恢复杨桦林地植物功能型组成及其影响因素

依据生活型(乔木、藤本、灌木、半灌木、多年生禾草、多年生杂类草和一二年生草本)和水分生态型(旱生、旱中生、中生和湿生)将祁连山北坡次生杨桦林28个调查样地中的81个物种划分为18种植物功能型(Plant functiontypes,PFTs),并通过典范对应分析(CCA)方法研究植物功能型与环境因子间的关系.结果表明:自然恢复杨桦林地植物功能型主要集中在中生多年生杂类草(PFTs16)、湿生多年生杂类草(PFTs23)、旱中生多年生杂类草(PFTs9)和中生灌木(PFTs18)4个植物功能型上;乔、灌、草三层冠层特征和中生植物的大量出现,反映了群落植物生活型趋于复杂化和结构化,生态型逐渐向中生化方向演替的特点;土壤容重、有机碳和全氮含量主要影响植物的生活型分异特征,土壤含水量和林冠郁闭度是植物的水分生态型分异的主要环境因子,而坡位、坡度控制着群落植物总体分布格局的形成.图1表3参31     

基于DFA法的江苏省极端降水时空分布特征研究

为进一步掌握江苏省极端降水的时空分布特征,基于该省1961-2010年均一性较好的逐日降水数据,利用去趋势波动分析法确定了全省13个站点的极端降水阈值,并通过Morlet小波及Mann-Kendall法分析了江苏省极端降水频数的振荡周期及其突变。结果表明,江苏省极端降水年频数和夏季极端降水均呈现8～10 a的变化周期,且1998年和2006年分别为其突变增加年,而秋季极端降水主要呈2～3 a与5～7 a的变化周期;极端降水与降水总量的空间分布具有较好的一致性,均呈南部大、北部小的特征。     

西安市大气中多环芳烃的季节变化及健康风险评价

对西安市2009年6月-2010年5月空气中的总悬浮颗粒（TSP）和气态样品进行了连续采样，利用GC—MS对16种PAHs进行分析。∑PAHs浓度（气相＋颗粒相）范围为39．93～1032．46ng／m^3，平均值为197．34ng／m^3；其中，冬季大气中∑PAHs浓度最大，相对浓度的范围为31．21％～72．98％，而夏季的浓度最小；检测出16种2～6环的PAHs，其中以3—4环为主。利用特征分子比值法和因子分析进行源解析，发现研究区PAHs的主要来源为燃煤和机动车尾气排放。通过苯并（a）芘（BaP）等效毒性（BEQ）和苯并（a）芘等效致癌浓度（BaPE）进行健康风险评价，结果显示，西安大气中PAHs的毒性具有明显的季节差异，特别是秋季和冬季大气中PAHs对人类的健康存在较大的潜在威胁。     

介质阻挡放电联合催化臭氧化降解甲苯

采用介质阻挡放电区后结合MnOx/Al2O3/发泡镍去除甲苯,考察甲苯进气方式、臭氧产生方法及湿度对甲苯与O3同时去除的影响。结果表明,O3是等离子体区后催化降解甲苯的主要物种,介质阻挡放电联合催化臭氧化可实现甲苯及O3的同时高效去除。输入电压为9.0 kV时,甲苯的去除效率达92.8%,在80 min内O3的去除效率维持在99%以上。水蒸气对催化剂催化分解臭氧的活性没有直接的影响,O3浓度较高时湿度对甲苯降解效率的影响很小。GC-MS分析结果表明,甲苯降解的主要气相副产物有烷烃、酸、酮和含苯环有机物,提出了甲苯的降解途径。     

Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.